 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 DT12 Broadcast Cabling |
|
|
 |
|
|
t-series |
||
| Splitters - Made To Travel >> Ideal, portable, and small |
||
| Wireworks
T-Series Transformer Isolated Microphone Splitters, featuring genuine
Jensen Transformers, are compact, uniquely packaged, and easy to use. These innovative splitters are available in three models, offering one, two, or three isolated outputs for use in stage monitoring, remote recording, and broadcast applications. T-Series splitters are meant to be used wherever a single microphone signal must be fed to more than one input. Each unit provides one channel of microphone splitting, and with T-Series' unique packaging, up to 10 splitters may be rack mounted in one 5.25" space. T-Series Microphone Splitters, like all other Wireworks Microphone splitting products, utilize only the highest quality transformers, providing uncompromising performance in all applications. Each microphone splitter features a 1:1, 1:1:1, or 1:1:1:1 turns ratio bridging transformer with a single primary and one, two, or three secondary windings. Transformers also maintain separate faraday shields and reject common mode noise caused by the voltage differences between the chassis of the multiple mixers. Phantom power can be provided by the mixer which terminates the microphone directly. The splitter is equipped with two switches, one to lift the ground to the isolated output(s) and the other to lift the chassis ground from the direct output for optimum performance. T-Series splitters are ideally suited for applications where the microphone lines have not been incorporated into a large Multicable system, but where quality, reliability, and performance are essential.
|
 |
|
|
|
||
| TSBD | |||||
 |
|||||
| Single input transformer isolated microphone splitter, female XLR microphone input, male XLR connector direct output, male XLR connector isolated output. | |||||
|
|
|
|||
| TSBT | |||||
|
|||||
| Single input transformer isolated microphone splitter, female XLR microphone input, male XLR connector direct output, two male XLR connector isolated outputs. | |||||
|
|
|
|||
| TSBF | |||||
|
|||||
| Single input transformer isolated microphone splitter, female XLR microphone input, male XLR connector direct output, three male XLR connector isolated outputs. | |||||
|
|
|
|||
| TRA-10 | |||||
| Universal rack mount adapter for all T-Series products. Holds ten T-Series units in a 5.25" rack space. | |||||
| Back To The Top |